NEW TOOL HELPS AUTOMAKERS SILENCE IRRITATING WHISTLE NOISE
COLUMBUS, Ohio -- Ohio State University engineers are helping automakers deliver a quieter ride, by reducing whistle noise in the engine's air intake and exhaust systems.
The same technology may also quiet other air circulation systems, improve the accuracy of air flow measurements in general, and prevent vibration-related failures in many engineering applications, including gas pipelines.
Ahmet Selamet, professor of mechanical engineering at Ohio State, and his students designed a pipe adapter that fits into engine's intake ductwork and helps engineers study whistles. In experiments, they were able to reduce the sound of a whistle by as much as 30 decibels, so that the noise was no longer audible inside the passenger compartment of a car.
Whistle noise has long been an issue for the auto industry, Selamet explained. A car's intake and exhaust system contain a large number of branched pipes. Air streaming through the pipes combined with the acoustic resonances in these branched structures leads to whistles.
"Pipes can generate sound just like a flute or other wind instruments," Selamet said. "Changing the length, diameter, or location of a branched pipe changes the frequency and amplitude of the sound. Unfortunately, the sound created by an engine is not nearly as pleasant as the one created by a flute."
Selamet described his strategies for eliminating whistles in a recent issue of the Journal of Sound and Vibration. Along with Ohio State research engineer Yale Jones and former graduate students Darius Kurniawan and Brian Knotts, Selamet collaborated with Jim Novak, senior technical specialist in powertrain operations of Ford Motor Co., which sponsored this research.
Together, the engineers designed a T-shaped aluminum pipe adapter that fits into the intake system of an engine and allows for fast and easy investigation of airflow resonances. Acoustic sensors and software help the engineers understand where and how the whistles form. They then use that information to redesign the pipe configuration and eliminate the noise.
Selamet calls his invention a "generic" pipe adapter, because it can be used to diagnose whistle noise in any commercial vehicle.
Straight sections of the generic adapter connect in-line with the engine
intake duct under investigation. The branch sticks out sideways, and can
be lengthened or shortened easily by hand. The diameter of the branch
can be adjusted as well. This allows engineers to readily examine how
different pipe designs affect whistle noise.
With three shapes of ramp -- a flat steep slope, a flat shallow slope, a V-shaped slope -- the engineers performed experiments with their pipe adapter on an air intake system of a full-size Ford engine.
The auto industry has used ramps for this purpose in the past, Selamet explained, but this is the first time Ohio State's generic adapter was used to quickly find the ideal ramp shape for a particular application.
In Selamet's laboratory setup, air flowing past the engine's throttle plate mixed with another stream from a nearby duct. The air streams swirled into a vortex that created sound waves. The resulting whistle noise rose to 135 decibels, just above the threshold of pain for human ears.
Of the three ramps, the one with the flat steep slope was most effective for silencing the whistle. It reduced noise levels to 105 dB, comparable to the normal levels for an engine intake system in a passenger car.
The adapter can save automakers time and money. Whistles often crop up late in the design stage of cars, as engineers rearrange pipes for a number of reasons, Selamet said.
"One pipe gets longer, another gets shorter, location and diameters change. Sometimes the arrangement becomes just right to create a noise that is particularly annoying. Suddenly the car isn't salable," Selamet said.
With so many pipes as the potential source of whistles, engineers can have a difficult time figuring out which pipe is to blame. They often resort to expensive trial and error, Selamet said.
That's why he and members of his research team at Ohio State's Center for Automotive Research and Intelligent Transportation (CAR) have been developing reliable strategies to understand the physics of whistles, and diagnose and suppress them quickly.
"Once we understand the fundamentals of how whistles form, we can find a way to remedy these problems. Our goal is to close the gap between laboratory experiments and the actual vehicle, by laying down the basic principles that apply universally to any model of car," he said.
The same principles could prevent whistle noise in ventilation systems and air compressors as well, Selamet said.
Natural gas lines suffer from whistles, too. But in this case, rather than an annoying sound, the associated vibrations may cause greater concern. Vibrations in gas pipelines can cause damage over time and eventually lead to failures of valves and other components.
Selamet will continue working with Ford and other industrial partners at CAR to develop bench-top techniques and find new ways of suppressing noise caused by airflow inside and outside of vehicles.
Contact: Ahmet Selamet, (614) 292-4143; Selamet.firstname.lastname@example.org
Written by Pam Frost Gorder, (614) 292-9475; Gorder.email@example.com